Download Additional Information

ASCO Intrinsically Safe (IS) Series Valves

ASCO's Intrinsically Safe solenoids have an enclosure to provide corrosion resistance in harsh environments. These units are acceptable for use in hazardous locations, as classified by the National Electrical Code: Classes I, II, and III, Division 1, including Groups A through G. Triple redundant diodes prevent electrical pulse from flowing back into the hazardous area.

Download Additional Information

ASCO Low Power Series Valves

ASCO's Low Power molded one-piece solenoid comes with a highly efficient solenoid cartridge and special low wattage coil. These units offer increased ambient temperature capabilities up to 175°F (80°C).  Valve is designed for use in automation of plant control systems to provide PLC compatibility, reduced battery drain and heat rise, and reduced wiring cost. Use limited to air or inert gas only.

Download Additional Information

ASCO 8290 Series Valves

The ASCO 8290 Angle Body Piston Valve is a 2-way direct acting valve available in a normally closed or normally open construction. They have proven durability in handling aggressive fluids, such as steam, hot water, solvents, and light slurries. The 8290 Series features a straight-through design available with bronze or stainless steel bodies. Optional features include position indication and proportional control.

Download Additional Information

ASCO Hot Water and Steam Series Valves

ASCO's Hot Water and Steam valves handle the challenges of high-temperature fluids with PTFE and EPDM discs, stainless steel seats, plus high temperature coils. They are offered in a wide range of valve constructions, including straight through and slow-closing, with normally closed and normally open operation.

Download Additional Information

ASCO Vacuum Series Valves

ASCO Low, Medium, and High Vacuum Service Valves are utilized in vacuum breaking and roughing pump applications. Unit offers a Zero Minimum Operating Pressure Differential while Elastomers are de-gassed and cleaned ("VH" suffix). Mountable in any position, except as noted.

Download Additional Information

ASCO Posiflow Series Valves

Flow rates on the ASCO 8202 / 8203 are adjustable between 0% and 100% of rating. This control is achieved by applying straight voltage between 0 and 24 VDC via a potentiometer or other variable power supply.  Flow rate can also be regulated by a range of electrical inputs (sensors, transmitters, PLC, etc.) via an ASCO Electronic Control Unit or similar circuit.