Non-conductive ladders shall comply with ANSI A-14.5.

Inspection of all ladders should visually determine the following:

  1. Rung and side rails free of defects.

  2. Side rails free of sharp edges.

  3. Joint between rugs and rails tight.

  4. Rungs free of oil and grease.

  5. Safety shoes in good condition.

  6. Hardware and fittings securely attached and in good operation condition.

  7. Ladder properly identified.

  8. Extension ladders must have a safety catch to lock the position of extension.

  9. Non-conducting ladders used when performing electrical work. Non-conductive ladders must comply with ANSI A-14.5.